Vauxhall Insignia - Engine malfunction indicator lamp lights up during the thrust phase | HELLA
Vauxhall
Insignia
Model year: 2009 – 2011
Engine code: A18XER
Vehicle Identification Number: 91000001 – B1198549
Engine malfunction indicator lamp lights up during the thrust phase.
Error code: P0300
meaning: several cylinder misfires identified.
Error code: U0100
meaning: data bus, engine control module A no communication.
In addition, the following message is displayed by the control unit in the error log:
The error codes were set at 0% throttle position and catalytic converter temperature above 900° C.
If the two error codes are associated with the values in the error log, this may point to the control module software.
The vehicle manufacturer states that the remedy here is to program the engine control module with revised and improved software.
The software update can be carried out by an authorised dealer.
Repair Tips
BMW 530d F11
Reading time: 1 minute
Repair Tips
BMW 3 Series - Engine control light is on
Reading time: 1 minute
Repair Tips
Hyundai IX 35 Engine will not start
Reading time: 1 minute
Repair Tips
Vauxhall Corsa B Engine jerking while driving, irregular idling
Reading time: 1 minute
Repair Tips
Peugeot 307 Engine jerks when accelerating
Reading time: 1 minute
Repair Tips
Mercedes C Class ESP ABS pilot lamp lights up
Reading time: 1 minute
Repair Tips
Citroen C5 Irregular engine running
Reading time: 1 minute
Repair Tips
Alfa Romeo Model 147 Engine will not start
Reading time: 1 minute
Repair Tips
Vauxhall Zafira B Engine power loss
Reading time: 1 minute
Repair Tips
Vauxhall Corsa C Engine is not running true
Reading time: 1 minute