Peugeot 406 - Engine cuts out after starting | HELLA
Peugeot
406 2.0 Hdi 110
Model year: 2001
Engine code: RHZ (DW 10 ATED)
Engine cuts out after starting
With the above-mentioned vehicle, the engine either cuts out after starting it up or it fails when an attempt is made to drive off. It is also very difficult to start the engine again after such a failed attempt.
When the error memory is read, the following message can be seen:
- Faulty rail pressure sensor
The first thing to do is to use the relevant diagnostic equipment to check the fuel pressure.
If the pressure is non-existent or if it is very slight, the fuse of the pre-feed pump could be faulty or the main supply relay is defective.
In order to solve the problem, the fuse should be checked and also the main supply relay and, wherever necessary, these should be replaced.
Repair Tips
BMW 3 Series - Engine control light is on
Reading time: 1 minute
Repair Tips
Hyundai IX 35 Engine will not start
Reading time: 1 minute
Repair Tips
Vauxhall Corsa B Engine jerking while driving, irregular idling
Reading time: 1 minute
Repair Tips
Peugeot 307 Engine jerks when accelerating
Reading time: 1 minute
Repair Tips
Mercedes C Class ESP ABS pilot lamp lights up
Reading time: 1 minute
Repair Tips
Citroen C5 Irregular engine running
Reading time: 1 minute
Repair Tips
Alfa Romeo Model 147 Engine will not start
Reading time: 1 minute
Repair Tips
Vauxhall Zafira B Engine power loss
Reading time: 1 minute
Repair Tips
Vauxhall Corsa C Engine is not running true
Reading time: 1 minute
Repair Tips
Citroen Dispatch Jumpy Illumination of the engine control light and sporadic problems on engine start
Reading time: 1 minute