Ford Ranger - jerking during acceleration and engine control lamp on
| Data sheet | |
| Manufacturer | Ford |
| Vehicle model | Ranger |
| Engine | 3.0 TDCI |
| Engine code | WEC |
| Year of manufacture | 2006 - 2011 |
| Symptoms | Vehicle jerks during acceleration | Engine control lamp lights up |
| Error code | P0201 |
Vehicle judders and jerks during acceleration: engine control lamp is on and error code P0201 shows up
If the above-mentioned set of error symptoms is detected in connection with error code P0201 (Fig. 1), a possible cause may be a contact fault on the multi-connectors on the injection system harness. If no other defects have been found during the fault diagnosis on the injection system, the harness and the connectors should be checked and, if necessary, repaired or replaced (Fig. 2).
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.