BMW F21 - tyre pressure monitoring system failed
| Data sheet | |
| Manufacturer | BMW |
| Vehicle model | F21 |
| Engine | Any |
| Year of manufacture | From 2011 |
| Symptoms | Tyre pressure monitoring system |
Tyre pressure monitoring system failed
The tyre pressure monitoring system may fail on the above-mentioned vehicle model.
The remote control receiver is installed behind the C-pillar side panel in the luggage compartment on the right.
To replace the receiver, proceed as follows:
- Remove the C-pillar panel in the luggage compartment using a suitable tool in accordance with the manufacturer's instructions
- Remove the expanding rivet (Fig. A) using a suitable tool
- Loosen the plug connection on the component
- Remove receiver
Installation is carried out in reverse order.
Once the cause of the fault has been rectified, delete the error memory. Finally, the tyre pressure monitoring system is to be re-initialised on a test drive.
This may also be of interest to you
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.