Power Beam S-series reverse lamp

Halogen replacement reverse lamp at the best price-performance ratio: The HELLA Power Beam S-series reverse lamp with its universal design is ideal for replacing existing halogen units 1:1. It impresses with its higher efficiency and longer service life.

 

With its light output of 1,150 lumens, the Power Beam S-series reverse lamp ensures safe manoeuvring even in the dark. The daylight-like light is distributed homogeneously and widely in the rear working and manoeuvring area.

 

Thanks to automatic dimming from a temperature of +50 °C and the new, efficient cooling fins, the LED reverse lamp does not overheat. The housing, the cover lens and the bracket are made of special, very light and corrosion-resistant plastics. By reducing weight and increasing energy efficiency, the Power Beam S-series reverse lamp also contributes to reducing CO2 emissions.

 

The lamp is suitable for transporting dangerous goods thanks to ADR/GGVSEB approval. It is completely dustproof, waterproof and resistant to high-pressure cleaning. It can be mounted upright and pendant.

Product Advantages

  • Halogen replacement series
  • Longer life and higher efficiency compared to halogen
  • Low weight and high corrosion resistance thanks to plastic materials
  • ADR/GGVSEB certified for transport of dangerous goods

Technical Data

Operating voltage range Multi-voltage (9-32 V)
Rated voltage 12 V and 24 V
Current consumption 12 V: Ø 0.85 A*
24 V: Ø 0.41 A**
Power consumption 12 V: Ø 11.2 W*
24 V: Ø 11.6 W**
Light output (warm)

Ø 1,150 lm

Light source LED
Colour temperature 5,000 K
Material Housing: heat-conductive plastic
Cover lens: impact-resistant plastic
Bracket: glass-fibre reinforced plastic
Weight 398 g
Temperature range -40 °C to +85 °C (overheating protection)
Protection class IP 6K7, IP 6K9K
Approved ECE-R10, ECE-R148, ADR/GGVSEB
Compliant RCM, CISPR 25 Class 5 (12 V) and Class 4 (24 V)
Protection Polarity reversal protection, overvoltage protection
Salt spray resistance 720 h acc. to DIN EN ISO 9227
Mounting Upright and pendant mounting
Connection DEUTSCH DT connector
Manufactured in Austria

* Warm measured at 13.2 V after 30 minutes of operation.
** Warm measured at 28 V after 30 minutes of operation.