Supplementary Side Direction Indicator Lamp (Cat. 5)

Going the extra mile: The additional side direction indicator light from the HELLA DuraLED product range ensures even better visibility on the roads. It convinces with its combination of energy-efficient light-emitting diodes (LEDs) and its use of precision optics. This achieves a strong signalling effect. The best thing is that, compared to lamps with conventional bulbs, they can achieve a 90-percent energy saving. For even better visibility, the light disc design provides a wide light dispersion. The DuraLED additional side direction indicator light is a multi-voltage lamp for 12 and 24 volt systems and can be easily installed in line with the plug & play system.


The DuraLED lamp series from HELLA is equipped with a highly impact-resistant lens made of UV-resistant Grilamid, making it particularly durable. The integrated polarity reversal protection also ensures that the lamps are not damaged if the polarity is accidentally reversed. They are tested in accordance with HELLA standard 67101 and thus meet the requirements for buses, commercial vehicles, trucks and tractors over 6.5 tons. The lamps are completely sealed in accordance with IP 6K7 and IP 6K9K and are impervious to high-pressure jet cleaning or temporary immersion. They also impress with the proven HELLA "Fit and Forget" technology.

Product Advantages

  • Ease of installation: Plug & Play
  • High impact resistant lens made from Grilamid
  • Surface mount

Technical Data

Type approval

ECE (E24)

Operating voltage

Multi-voltage (9-33 V)

EMC approval ECE-10R-05
(E4) 3195
Functions Supplementary Side Direction Indicator Lamp (Cat. 5)
Sidemarker (Cat. SM1)
Front Position / End Outline
Rear Position / End Outline
Mounting Horizontally
Number of LEDs 2
Power consumption < 1 W
Temperature range -40 °C to +60 °C
Protection class IP 6K7,
IP 6K9K
Contacts DETUSCH DT-connector
Installation Screw connection with 2 screws Ø 4 mm
Specification HELLA standard 67101
Class 1.2, 2.2, 3.2, 4.1,
5.1, 6.1, 7.2, 10.2, 11.2
Design life Design life of the vehicle*

 

 

* Dependent upon the operating temperature.
Note: The individual LED lights may only be operated with a 3 A fuse. Operation of
the light with AC voltage or synchronised DC voltage is not permitted!

Program Overview

Function EMC approval *Packing Unit Part number
Supplementary Side Direction
Indicator Lamp (Cat. 5)
5 01 (E24) 0067
10 R-05 (E4) 3195
1 2BM 980 990-121
8 2BM 980 990-127

Downloads