${productDescription}
|
|
|
|
|
|
|
|
2023-02-17
Control units for current monitoring
Well protected against failure: HELLA control units for current monitoring are used for custom functional monitoring of LED headlamps and beacons. They determine the average energy requirements based on a continuous current measurement.
The control unit is connected upstream of the LED headlamp and continuously measures the current consumption when switched on.
HELLA offers two 12 V and one 24 V control unit variants, which indicate the correct function of the headlamp through a high gauge at the status output when a minimum current value is exceeded, and headlamp defects by a low gauge when the current falls below the minimum value. Monitoring takes place exclusively when the ignition and headlamps are switched on.
Well protected against failure: HELLA control units for current monitoring are used for custom functional monitoring of LED headlamps and beacons. They determine the average energy requirements based on a continuous current measurement.
The control unit is connected upstream of the LED headlamp and continuously measures the current consumption when switched on.
HELLA offers two 12 V and one 24 V control unit variants, which indicate the correct function of the headlamp through a high gauge at the status output when a minimum current value is exceeded, and headlamp defects by a low gauge when the current falls below the minimum value. Monitoring takes place exclusively when the ignition and headlamps are switched on.
Control unit for current monitoring of LED headlamps and beacons.
Technical drawing of the control unit for current monitoring.
Technical Data
| Operating temperature | -40 °C to +85 °C |
|
Protection class |
IP 5KX |
|
Connection |
Flat connector DIN 46244 A6, 3 x 0.8 mm |
Program Overview
| Variant | Load current threshold | Part number | Packaging unit |
|---|---|---|---|
| 12 V | 500 mA | 5DS 011 630-001 | 1 |
| 24 V | 350 mA | 5DS 011 630-211 | 1 |
| 24 V | 500 mA | 5DS 011 630-011 | 1 |