BMW / MINI All models - Repair note disk brake

BMW / MINI All models

Repair note disk brake

Notes on the replacement of brake pads and brake discs

In order to be able to carry out a professional and correct service within the scope of the repair to the brake disc system, the following procedures are specified by the vehicle manufacturer BMW.

Procedure

The following spare parts described numerically in the figure must be replaced or are required when renewing the brake pads.

Brake pad wear indicator (1)
Brake pad paste (2)

The following spare parts must be replaced or are required when renewing the brake discs.

Brake pad wear indicator (1)
Brake pad paste (2)
Brake pads (3)

On vehicles that are older than 48 months, it is also recommended that the retaining spring (4) is renewed in both cases.

Mounting instructions

In this conjunction, please note the vehicle-specific repair instructions!

Figure

The following graphic representation is only used to describe the content of the document and does not correspond to the components of the vehicle manufacturer.

Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only. Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.