If the air conditioning on one of the above vehicles fails, you should first check the fuses and the magnetic clutch. If they are OK you can then check the high and low pressures. If your measurements show that the high-pressure side and the low-pressure side are at the same pressure (around 6bar), this indicates a fault (e.g. contamination, see picture) in the regulating valve integrated into the wobble plate of the compressor.
When the air conditioning is switched on, the pressure on the high-pressure side should be between 8 and 15bar, and on the low-pressure side around 2bar.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful