If the above error is discovered together with an illuminated ABS warning light, the ABS/ESP control unit will automatically initiate a function test. During this test, the transversal acceleration, pressure and longitudinal acceleration sensors are tested. One possible cause of the problem could be a previous repair or implausible sensor signals.
In this case, a basic setting routine must be carried out.
Carrying out a basic setting routine
The error is automatically cleared following a successful basic setting routine.
The ABS/ESP system must not actively intervene during the test drive!
This information can also be applied to other models of this brand that experience the same type of error.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful