Data sheet | |
---|---|
Manufacturer | Opel/Vauxhall |
Vehicle model | Astra K |
Engine | 1.6 16 V CDTI |
Year of manufacture | from 2016 to 2017 |
Symptoms | Particulate filter regeneration not possible |
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
Particulate filter regeneration may not be possible with the above-mentioned vehicle. The error codes P2080 and P2084, equivalent to exhaust gas temperature sensor 1/2 having an invalid signal, are stored in the error memory.
If no faults are detected on the sensors and peripherals during troubleshooting and control unit diagnostics, the fault may be related to a software error in the engine control unit. In such a case, the control unit software has to be checked and an update carried out if necessary.
A software update can be carried out, for example, via Hella-Gutmann macsRemote Services or by using a pass-through-capable diagnostic device from the mega macs series. Furthermore, registered access to the vehicle manufacturer's online portal is required.
If the appropriate equipment is not available, please contact an authorised specialist workshop.
IMPORTANT
Please always follow the repair instructions from the vehicle manufacturer when carrying out such work.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful