Data sheet | |
---|---|
Manufacturer | VW | Seat | Skoda |
Vehicle model | Various models |
Year of manufacture | 2011 - 2019 |
Symptoms | Failure control bulb lights up sporadically |
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
On the above-mentioned vehicles, the control lamp, which signals the failure of a bulb (light bulb) may suddenly light up. A visual inspection of the lighting equipment on the vehicle, however, does not reveal any defect.
With the help of a diagnostic device (e.g. Hella Gutmann mega macs X) and by reading out the error memory, it is often possible to determine which piece of lighting equipment is responsible for the error message.
Particular attention should be paid to the daytime running lamps. Malfunctions may occur here caused by the diminishing spring force of the bulb holder.
Poor contact causes burn marks on the holder and on the bulb. Apart from that, corrosion on the contacts can also be considered to be a cause of the fault.
In order to remedy this, both the bulb holder and also the bulb should be replaced and the error memory cleared.
In certain cases, this information can also apply to other vehicle makes.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful