If the battery of the vehicles specified above discharges after the vehicle has been standing still for longer periods, a possible cause could be the ignition switch.
Due to an electronic malfunction on the ignition switch, a quiescent current that is too high may flow when the ignition is switched off. This can lead to the battery discharging.
The vehicle manufacturer has already addressed the issue and notified owners of all models affected.
For various reasons, however, it can be assumed that not all vehicles have been inspected and repaired.
On vehicles that have been built between CW 40 / 2012 and CW 1 / 2013, a new ignition switch is installed in a specialist garage and the ignition key is newly programmed.
Following a repair, the vehicles are marked in the area of the on-board tool kit with a sticker.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful