If one of the errors listed above occurs on these vehicle models, the cause may stem from a vertically mounted safety clip on the brake shoe.(Fig.1)
The lower brake shoe spring presses on the safety clip, thereby preventing the adjusting element from moving. In addition, this can result in slippage during adjusting, leading to damage to the gear teeth. In this case, the position of the safety clip has to be corrected.
Positioning the safety clip horizontally (Fig. 2) ensures free movement of the brake shoe spring and thus unimpaired functionality of the adjusting device.
Please remember to always follow the general assembly instructions for installing and removing drum brakes and other special installation instructions from the brake pad or vehicle manufacturer in this regard.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful