On the vehicles listed above, there may be malfunctions in the regeneration sequences of the particle filter if the wiring harness for the tow hitch is connected incorrectly.
In addition, oil may be diluted due to the incorrect regeneration (after-injection).
In the event the characteristics listed above are present, the regeneration sequences absolutely must be checked to avoid drastic oil dilution that could result in engine damage.
Please note:
The trailer electrical system uses the CAN bus to communicate with the control unit for the tail lights, which are, in turn, integrated into the vehicle's on-board electronics via CAN bus.
In original Peugeot tow hitch cable sets, a plug marked in yellow has to be connected to the BSR control unit (trailer switch unit). The plug with a double cable assignment has to be connected to the control/rear switch unit (PSF2).
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful