If severe engine jerking is identified on the above vehicle at speeds of 3000 rpm and above and error code P1113 is read out from the error memory at the same time, the cause could be a clogged fuel filter.
If insufficient fuel is supplied to the electronic diesel control system, there is a pressure drop in the system which is detected by the electronic sensors. The error stored in the control unit is generally attributed to the following causes during general diagnostics:
Repair note
Before replacing the various components, first check the fuel supply system.
We recommend the following procedure:
If significant deviations are identified, replace the fuel filter and repeat the checks.
Please always observe the maintenance and repair notes provided by the vehicle manufacturer in this context.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful