Opel Insignia - Height adjustment system for seating defective | HELLA
Opel
Insignia
Model year: 2009
Height adjustment system for seating defective
If the height adjustment system for the seating in the vehicle mentioned above no longer functions, it can be the fault of a blocked adjustment spindle.
The motor responsible for the adjusting of the seat height can jam between the spindle and the plastic stopper.
The problem can be solved with the help of an additional washer (1).
Procedure:
- Dismantle seat
- Loosen screw (2) and dismount
- Place washer (1) with the measurements 6.4 x 18 x 1.6 in position (OE No. 11035613)
- Lubricate with special grease (OE No. 13329237)
- Replace screw (2) and tighten with 10 Nm torque
- Remount seat
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful