There have been complaints of noise in the front roof lining area in the vehicles specified above.
The cause of this noise development could be the clips that were used as a mounting aid for the panorama windshield (figure 1).
The clips may come loose due to heat generation (insolation) for example.
Proceed as follows to rectify the problem:
· Remove the roof lining as described in the vehicle manufacturer's repair manual.
· Carefully loosen the clips (figure 2, position 1) using a plastic wedge (figure 2, position 2) and remove them.
Attention: do not use any sharp-edged tools!
· The fixing brackets (figure 2, position 3) can be bent downwards if required.
· Re-install the roof lining as described in the vehicle manufacturer's repair manual.
The clips are no longer used in production as of 08/29/2012.
Figure 1
Figure 2
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful