Data sheet | |
---|---|
Manufacturer | Opel/Vauxhall |
Vehicle model | Ampera |
Engine | 16 V hybrid |
Engine code | A14 XFL |
Year of manufacture | 2014 |
Symptoms | Discharging of 12 V battery for the vehicle electrical system, alarm system is triggered sporadically |
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
If the above-mentioned defect is detected, it may be related to a problem with the keyless central locking system.
Because of water ingress and corrosion affecting the door handle switches, the receiver detects an opening request and sends this signal to the body control unit. At the same time, the vehicle's interior lighting is switched on and the vehicle electronics are "woken up", which can lead to unwanted current consumption and ultimately to the discharge of the 12 V battery serving the vehicle electrical system.
If, as part of the fault diagnostics procedure, no defects in the charging system or on the 12 V battery show up, the central locking system should be checked out.
Using a diagnostic device, read out the parameters in the body control unit and then put water on the door handles in turns. If this alternating action changes the parameters on a door handle or even switches on the interior lighting, then the cause has been localised. In such a case, the relevant door handle with its integrated switch is to be replaced.
This defect may also occur in other models with the same type of central locking system.
Please always follow the repair instructions from the vehicle manufacturer when carrying out this repair.
Work on or in the immediate vicinity of high-voltage systems may only be carried out by persons who have been instructed in electrical engineering and who are appropriately qualified. Improper handling can lead to life-threatening situations. Each country's specific laws and regulations regarding work on high-voltage systems are to be strictly observed.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful