Mazda 6 - Engine will not start | HELLA
Mazda
6 (
GH)
Model year: 2008-2012
Engine will not start
If the engine in the above vehicle will not start and the display remains dark, the reason may be a faulty earth connection (see marking, image 1).
Image 1.
It is possible that the connection to the earth pin was not secured properly. This means that clean contact between the earth cable and the earth connection pin cannot be guaranteed.
In order to remedy the fault, the connection should be checked, and cleaned if required. The connection must then be screwed together properly, in line with the manufacturer's instructions.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful