Mazda Model 5 - Engine stalls | HELLA
Mazda
Model 5
Model years 2005 to 2010
2.0 diesel engine (RF Turbo) 105 kW
Engine stalls
If a customer complains about the above problem, this could be caused by the fuel pressure control valve. Furthermore, occasional loss of power and poor engine cold starting performance may also be complained about. In this case, the control valve must be replaced (see Figure 1). It can be obtained under number 294009-0120. The valve is located on the rear housing part of the high pressure pump (Fig. 2).
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful