Data sheet | |
---|---|
Manufacturer | Ford |
Vehicle model | Edge |
Engine | 2.0 Diesel | All models |
Year of manufacture | From April 15, 2019 |
Symptoms | Noise and loss of power during acceleration phase |
Important safety note
With this repair job, the customer complains that a humming noise can be heard during acceleration accompanied by a loss of power.
In this case, the cause of the above problem is a leak in the hose connection between the turbocharger and the intake air flap actuator, also called intake air damper.
Check the entire air supply system from the air filter to the engine for any kind of leakage. If no further damage can be detected, replace the intake air hose connection between the turbocharger and the intake air damper (OE part number: 2414667).
Finally a test drive should be performed in order to run checks on the repair work.
Please note that such work should only be carried out by an authorised specialist workshop and that the vehicle manufacturer's repair and maintenance instructions must be observed!
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful