Fiat Panda - Low beam not functioning | HELLA
Fiat
Fiat Panda
Model year: 2003 up to 2013
Low beam not functioning
If the above-mentioned problem is detected, it may be caused by a poor contact between the connection socket and the fuse box (Fig.1).
Fig.1
Remedy:
When troubleshooting, first check the contact of the 10-pin multiple connector (Fig.2) to the rear panel of the fuse box / relay plate 2. Here the contact of the plug pins of the low beam can be negatively influenced as a result of excessive heat output.
In order to carry out repairs, the vehicle manufacturer has on offer a repair kit for the wiring harness (Art. No.: 71745167).
Fig.2
Check fuses:
F12= Low beam, right 10A
F13= Low beam, left 10A
Please follow the repair instructions specified by the vehicle manufacturer for the carrying out of such work.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful