Citroen C3 Pluriel (HB) - Water entering rear combination lamp | HELLA
Citroen
C3 Pluriel (HB)
Water entering rear combination lamp
On the vehicles mentioned above, there is a risk of the rear combination lamp functions failing due to water ingress (Figure 1).
The rear combination lamp must be removed for closer inspection. Remove both screws (Figure 2).
Then unclip the lamp at the side (Figure 3), remove and unscrew the bulb holders. Look out for contamination and corrosion (Figure 4).
In most cases, the water ingress is due to a faulty welding seam on the plastic (above the lamp) (Figure 5).
Figure 1 Figure 2
Figure 3
Figure 4
Figure 5
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful