Brake system maintenance note when using wheel cleaner | HELLA
Potential effects from wheel cleaner on the brake system
The usual care as for all cleaning agents should be exercised when handling wheel cleaner. Sparingly apply the wheel cleaner in specific places to avoid contact with the brake disc and the brake system.
The contents of these cleaning agents can lead to damage to the brake system, impaired braking and permanently decreased comfort.
Recommendation
Apply these products with care, because less is more in this instance.
Use wheel cleaners that are applied using a paint brush, brush or sponge. The spread from sprays is too large.
Tip
If cleaner gets on the brake disc when cleaning the wheels, it should be thoroughly rinsed off with cold water. Braking repeatedly over the course of normal driving will clean the brake disc again.
The same applies when visiting a car wash.
The car wash should be used immediately after cleaning the wheels.
The concentration of the cleaning agent is diluted by the water and hardly has any impact on braking performance. Wet brakes normally return to full effectiveness after braking a few times.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful