If heavy fogging or, in some cases, increased water ingress is observed inside the headlamp, this may be caused by a crack in the housing of the SML (side marker lamp) (Fig. 1).
The SML is partially covered by the CW seal.
(Figure 2)
Cause:
The housing of the SML is damaged.
Cracks may have formed by adverse mechanical stress, for example, if pressure forces occur in this area due to objects or tools: (closing the bonnet without removing tools / objects before).
- Incorrect adjustment of the bonnet.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful