If a customer complains about the above problem, this could be caused by a defective crankshaft sensor. The vehicle cannot be started sporadically, irrespective of whether the engine is warm or cold. Various error codes may also be saved in the event memory. An inductive sensor is installed in this vehicle. This can be checked relatively easily by measuring the resistance. The resistance must be 900 Ohm. If not, the sensor must be replaced. The sensor can be ordered wholesale using HELLA part number 6PU 009 146-631 (see Fig.).
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful