If the fault mentioned above occurs on this vehicle model,
the problem may be related to a defect
on the filter drier for the air conditioning system. A lack of porosity in this part results in a pressure increase at high exterior temperatures, as a consequence the compressor is switched off. In this case the amount of refrigerant in the system should be checked first. If the amount of refrigerant in the system is in accordance with the information from the vehicle manufacturer, the filter drier (A) on the condenser should be replaced.
(Hella article number: 8FT 351 335-141) Then check the air conditioning system for correct function.
Note: In relation to this aspect please follow the general information on diagnostics for troubleshooting air conditioning systems and the installation instructions from the vehicle manufacturer.
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their day-to-day work. The information provided on this website is intended for use by suitably qualified personnel only.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval and indication of the source. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful