HELLA TECH WORLD NEWS

If the above vehicle model experiences engine starting difficulties regardless of the temperature, one possible cause may be a defective intake manifold pressure sensor. At the same time, the error code 17036 "Sensor reference voltage B: too low" may be stored in the error memory of the engine control unit. 

If the warning lamp for the engine oil level lights up on the vehicles mentioned above, the oil level must be checked immediately and, if necessary, oil must be added. Checking the oil level at regular intervals is recommended.

The parking assistant is a driver assistance system that supports drivers during manoeuvring and parking and warns them of obstacles in the immediate vicinity of the vehicle. The traditional parking aid operates on the basis of ultrasound that is emitted using several sensors. If an obstacle is detected, the driver is informed of this either visually or acoustically.

With the vehicle mentioned above, it can happen that a warning message is issued in connection with the hybrid system. The error message appears in the instrument cluster: "Fault in the vehicle electrical system, voltage converter". The system prompts the driver to bring the vehicle to a standstill.

We recommend the following procedure when replacing bulbs:

• Switch off the lighting and ignition.
• Remove the key and keep it in a safe place.
• Secure vehicle against rolling away. Apply the handbrake

In the above-mentioned vehicle types, faulty shifting behaviour of the DSG gearbox may occur. The cause of the fault is not always to be found in the gearbox periphery.

The knock sensor monitors the combustion process in the engine. Its signal helps the engine control to prevent knocking combustion and therefore protect the motor/engine control. On this page we will provide you with various information, including how a defective knock sensor becomes noticeable, the causes that may lead to its failure, and how it can be tested in the workshop.

The ABS/ESP warning lamp may light up sporadically on the above-mentioned vehicle series. After a restart, the warning lamp initially goes out again, but is reactivated after a short driving time.

HELLA LED Retrofit light sources can be used to retrofit LED technology in place of halogen vehicle lighting. These LED retrofits offer exceptional brightness – and with increased illumination, more light shines on the road. In addition, a longer lifetime compared with halogen bulbs makes LED retrofits a great option for any driver.

The DSC warning lamp on the above-mentioned vehicle series has been known to light up sporadically. In addition, various Check Control messages can be displayed in the instrument cluster.

In the above-mentioned vehicle series, an error message may suddenly appear, signalling the failure of a light source in the rear lamps. This series has a self-diagnosis function that checks the status of the light sources after the ignition has been switched on.

The engine power may be reduced in the above-mentioned vehicles, as a result of which the engine warning lamp in the instrument cluster is activated. Error code P2563 is stored in the error memory of the engine control unit.