If the defect described above occurs together with the listed error codes, a possible cause may be a defective plug connection of the accelerator pedal sensor.
In this case, we recommend the following procedure:
Note!
In this context, is is possible that additional error codes are displayed in the control unit:
P0226, P0227, P0228, P1631, P1632, P1633, P1634, P1639, P2123, P2127, P2128, P2135, oder P2138.
Example: parameter display in mega macs 66 diagnostic unit. Error-free signal curve following confirmation of accelerator pedal sensor
Important safety note
Not helpful at all
Very helpful