If this defect is found in the vehicle models mentioned above, this may be due to a brake caliper guide becoming stiff or stuck. Heavy oxidation inside the bore holes on the aluminum housing causes the damping sleeves to sit more tightly, which in turn causes the guide bolts to jam.
Since this defect is not visible from the outside, it is essential to check that the caliper guides are not clogged while carrying out brake repairs:
To do this, use a suitable reamer to clean out the bore hole evenly. During this repair process, the damping sleeves and, if necessary, the guide bolts need to be renewed.
If the oxidation is too heavy and it is not possible to repair the component safely, the brake caliper must be renewed.
If the vehicle is equipped with an electric parking brake, this must be deactivated before commencing repair work. Please observe the corresponding repair notes provided by the vehicle manufacturer.
This defect may also occur in other vehicle models with the same type of brake caliper.
Important safety note
Not helpful at all
Very helpful