KIA Niro - error message in the instrument cluster
| Data sheet | |
|---|---|
| Manufacturer | KIA |
| Vehicle model | Niro |
| Year of manufacture | 08/2017 – 01/2018 |
| Symptoms | Error message in the instrument cluster |
Important safety note
KIA Niro - error message in the instrument cluster
With this repair issue, the customer complains about receiving a variety of error messages in the instrument cluster. The cause of the above-mentioned problem is a damaged electrical cable (rubbing against the steering column).
Remedy:
- Check the electrical cable for damage and repair or replace if necessary
- Wrap the electrical cable (Pos.1) with adhesive tape. (Pos.2)
- Install cable ties and fix the electrical cable in place. (Pos.3)
Please note that such repair work should only be carried out by an authorised specialist workshop and that the vehicle manufacturer's repair and maintenance instructions are to be observed!
To be observed in the case of hybrid versions:
- electric vehicles have high-voltage components - there is a real risk of accident and injury (electric shock)!
- The high-voltage system is to be switched off by "a specialist trained to work on high-voltage, intrinsically safe vehicles".
- All work must only be carried out by "persons trained in electrotechnical matters" (ECS)!
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful