In the above vehicles, the engine may cut out after briefly stepping on the accelerator pedal or running over a pothole.
What is striking here is that when the error occurs while reading the parameters, the injection volume drops to 0 mg/stroke.
The cause of the above error is an insufficient power supply to the engine control module, which is caused by a faulty fuse.
Fuses can be damaged through mechanical tension in the fuse box.
In this case, a hairline crack in the fuse (15 A) at slot 2.05 may be responsible for the error.
The problem can be remedied by replacing the faulty fuse.
Important safety note
Not helpful at all
Very helpful