PR numbers for VAG vehicles | HELLA

Sometimes the identification of spare parts for the brake system is not only made by looking at the chassis number and the vehicle registration date. In such cases the primary option number (the PR number) is also required. This PR number is stated as an additional piece of information (Fig. 1) in the catalogue and is found placed after the article number.

"For process control reasons and in order to ensure unmistakable identification of the brake system in a vehicle, it is necessary to label brake parts with this additional PR number. Such identification be found on the service data medium for the relevant vehicle (sticker) in the service booklet (Fig. 2) or in the boot (Fig. 3)."

The primary option number always has three characters and has been used for VW vehicles since 1999. As an example, when it comes to identifying brake systems, the number range of "1LX" (front disc brakes) or "1ZE" (front disc brakes, coated) is used.

Our illustration of this use shows the PR number, "1ZE", on the data sticker (Fig. 4). This designation is then found again in the spare part catalogue (Fig. 1) placed after the appropriate spare part. Such a system guarantees foolproof identifying and subsequent matching up of spare parts.

(Fig. 1)

(Fig. 2)

(Fig. 3)