Download

Vauxhall Antara - Air-conditioning system is not functioning | HELLA

Vauxhall

Antara

With manual temperature control

Air-conditioning system is not functioning

In the above vehicles, incorrect service programming or incorrect coding could cause the air-conditioning compressor to no longer be activated.

The signal of the activating/deactivating switch for the air-conditioning system is forwarded to the electric system control unit. This control unit communicates with the engine control unit via the CAN bus. The compressor coupling relay is driven by means of the engine control unit. A diagnostics tool can not only read out the event memory, but can also check the function of the magnetic coupling by means of an actuator test. In addition, the diagnostics tool can "recognize" in what way the activating and deactivating signal of the switch arrives at the control unit.

If the fuses and wiring are OK, the activation circuit of the magnetic coupling and the switch have been checked, and the control unit does not contain any system-relevant error codes, then it may be possible to correct the problem by repeating the coding/service programming of the control unit. This should be performed by an authorized dealer.

Tip:

If the rear-window heater is not functioning and/or an error appears for a rain sensor (that is not even installed) at the same time as the above problem, then this points to incorrect programming/coding.

How helpful is this article for you?

Not helpful at all
5
4
3
2
1
Very helpful
Success

Wrong Captcha

Wrong Captcha

Error

Something went wrong

Great! Just one more Step

Subscription successful

Head to your inbox and confirm your email address so that you don’t miss our updates!

Get ready for brand new technical videos, car repair advice, trainings, helpful diagnostic tips, marketing campaigns and much more... delivered straight to your inbox every two weeks!