Vauxhall Adam - Stop lamps permanently on | HELLA
Vauxhall
Adam
Model year: 2013 to 2018
Stop lamps permanently on
If the above-mentioned problem is detected, one possible cause may be incorrect adjustment / positioning of the stop-lamp switch.
This can cause the stop lamp to light up permanently without the brake having to be applied.
It is also possible that the error code C0161 is stored in the ABS control unit.
Remedy:
Check functioning of the stop-lamp switch and readjust if necessary. In the event of malfunctioning, replace the stop-lamp switch and position it correctly.
In addition, read the error code memory in the ABS control unit and delete stored errors.
Repair Tips
Citroen Berlingo Failure of the low beam
Reading time: 1 minute
Repair Tips
Mini R57 Cabrio - replacing the xenon bulb
Step-by-step instructions are given on how to replace the xenon bulb in the above vehicles.
Reading time: 2 minutes
Repair Tips
Citroen C3 Pluriel HB Water entering rear combination lamp
Reading time: 1 minute
Repair Tips
Vauxhall Corsa D Low beam Replacing the H7 bulb
Reading time: 1 minute
Repair Tips
Mercedes Benz Vito 2 Faulty function Rear window wiper
Reading time: 1 minute
Repair Tips
Renault Clio Low beam not functioning
Reading time: 1 minute
Repair Tips
BMW E60 Headlamp fogging
Reading time: 1 minute
Repair Tips
BMW 3 series Licence plate lights fail
Reading time: 1 minute
Repair Tips
Ford Edge Functional failure of the front headlamps
Reading time: 1 minute
Repair Tips
Audi Cabriolet Insufficient light output
Reading time: 1 minute