bi-hella-logo-260x44

Škoda Superb - battery discharges

Data sheet
ManufacturerŠkoda
Vehicle modelSuperb (vehicles with diesel particulate filter)
Engine2.0 TDI
Year of manufacture2016-2018
SymptomsBattery is discharged/vehicle does not start
Recommended HGS tool/ HELLA Spare Part No.Relays: 4RA 933 332-451

Important safety note

Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.

Battery discharged, vehicle cannot be started

With the above-mentioned vehicle type, the radiator fan may switch on of its own accord and does not switch off. It is also possible for the radiator fan to be activated after a longer stationary period of over an hour. The battery is heavily discharged and it is no longer possible to start the engine.

One reason for this fault may be a thermally overloaded relay contact. This overload can cause the relay contact to "stick" and it can then no longer open properly. This can be done, for example, with a screwdriver. Tapping lightly on the affected relay usually opens the relay contacts again. If the contacts are open, the radiator fan also switches off again.

Another option for checking the relay contacts is the performing of a visual inspection. The relay housing can be opened and then the contacts inside checked. If thermal overloads are visible on the relay contact, the relay has to be replaced.

Once the cause of the fault has been removed, delete the error memory and then carry out a test drive.

IMPORTANT
Please always follow the repair instructions from the vehicle manufacturer when carrying out such work.
In certain cases, this information can also apply to other vehicle series.

This may also be of interest to you

Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.

How helpful is this article for you?

Not helpful at all
5
4
3
2
1
Very helpful
Success

Wrong Captcha

Wrong Captcha

Error

Something went wrong

Great! Just one more Step

Subscription successful

Head to your inbox and confirm your email address so that you don’t miss our updates!

Get ready for brand new technical videos, car repair advice, trainings, helpful diagnostic tips, marketing campaigns and much more... delivered straight to your inbox every two weeks!