Citroen C2 - Failure of the power steering | HELLA

Citroen

C2

All vehicles with power steering year of manufacture until December 2007

Failure of the power steering

If a customer complains about the above problem, this could be caused by a defective torque sensor. The customer notices this defect by an increased steering effort . In addition, the error codes C 1400 and C1413 (torque sensor, signal error, torque sensor, malfunction) may be stored. Before replacing the torque sensor, the connectors at the control unit of the electric power steering should be checked for proper seat (see illustration). The above problem may also be caused by a poor contact.

Citroen Berlingo Failure of the low beam

Reading time: 1 minute

Mini R57 Cabrio - replacing the xenon bulb

Step-by-step instructions are given on how to replace the xenon bulb in the above vehicles.

Reading time: 2 minutes

Citroen C3 Pluriel HB Water entering rear combination lamp

Reading time: 1 minute

Vauxhall Corsa D Low beam Replacing the H7 bulb

Reading time: 1 minute

Mercedes Benz Vito 2 Faulty function Rear window wiper

Reading time: 1 minute

Renault Clio Low beam not functioning

Reading time: 1 minute

BMW E60 Headlamp fogging

Reading time: 1 minute

BMW 3 series Licence plate lights fail

Reading time: 1 minute

Ford Edge Functional failure of the front headlamps

Reading time: 1 minute

Audi Cabriolet Insufficient light output

Reading time: 1 minute

Not helpful at all

5

4

3

2

1

Very helpful