BMW E60 - Headlamp fogging | HELLA

BMW

E60

Headlamp fogging

Water enters the headlamp

If heavy fogging or, in some cases, increased water ingress is observed inside the headlamp, this may be caused by a crack in the housing of the SML (side marker lamp) (Fig. 1).

The SML is partially covered by the CW seal.

(Figure 2)

Cause:

The housing of the SML is damaged.

Cracks may have formed by adverse mechanical stress, for example, if pressure forces occur in this area due to objects or tools: (closing the bonnet without removing tools / objects before).

- Incorrect adjustment of the bonnet.

Figure 1

Headlamp top view (Figure 2)

Citroen Berlingo Failure of the low beam

Reading time: 1 minute

Mini R57 Cabrio - replacing the xenon bulb

Step-by-step instructions are given on how to replace the xenon bulb in the above vehicles.

Reading time: 1 minute

Citroen C3 Pluriel HB Water entering rear combination lamp

Reading time: 1 minute

Vauxhall Corsa D Low beam Replacing the H7 bulb

Reading time: 1 minute

Mercedes Benz Vito 2 Faulty function Rear window wiper

Reading time: 1 minute

Renault Clio Low beam not functioning

Reading time: 1 minute

BMW 3 series Licence plate lights fail

Reading time: 1 minute

Ford Edge Functional failure of the front headlamps

Reading time: 1 minute

Audi Cabriolet Insufficient light output

Reading time: 1 minute

Citroen C2 C3 Failure of the front light

Reading time: 1 minute

Not helpful at all

5

4

3

2

1

Very helpful