If there are complaints for these vehicles that the tank gauge does not display "Full" (4/4), [instead displays approx. 3/4] even though the tank is full, a possible cause could be that the fuel pump assembly is not correctly aligned in the fuel tank.
Cause:
The fuel supply assembly/swirl pot of the fill level sensor may have been incorrectly installed or not properly engaged.
In this case, check the alignment of the fuel pump assembly and the connections/joints through the service opening on the fuel tank and correct them if necessary (firmly press down/engage the swirl pot).
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful