If the engine of the vehicle listed above does not start, the cause may be a defective power steering hydraulic pump.
To find the source of the fault in this case, the power steering’s CAN bus communication must be checked. Proceed as follows if no communication can be established.
If the engine starts although the cable harness plug is disconnected, the cause may be a defective hydraulic pump (power steering).
A new hydraulic pump should be installed to correct the problem.
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful