Vauxhall Insignia - Height adjustment system for seating defective | HELLA
Vauxhall
Insignia
Model year: 2009
Height adjustment system for seating defective
If the height adjustment system for the seating in the vehicle mentioned above no longer functions, it can be the fault of a blocked adjustment spindle.
The motor responsible for the adjusting of the seat height can jam between the spindle and the plastic stopper.
The problem can be solved with the help of an additional washer (1).
Procedure:
- Dismantle seat
- Loosen screw (2) and dismount
- Place washer (1) with the measurements 6.4 x 18 x 1.6 in position (OE No. 11035613)
- Lubricate with special grease (OE No. 13329237)
- Replace screw (2) and tighten with 10 Nm torque
- Remount seat
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful