Vauxhall Insignia - poor acceleration behaviour under load
| Data sheet | |
|---|---|
| Manufacturer | Vauxhall |
| Vehicle model | Insignia A |
| Engine | 1.6i 16 V |
| Engine code | A16 LET |
| Year of manufacture | 2009 - 2013 |
| VIN | 91008178 - C1056226 |
| Symptoms | Poor acceleration behaviour under load |
Important safety note
Technical information and practical tips have been compiled by HELLA in order to provide professional support to vehicle workshops in their work. The information provided on this website is intended for use by suitably qualified personnel only.
Poor acceleration behaviour - but no error code stored
If the above-mentioned defect is detected, it may be related to a software error in the engine control unit. If no other defects can be localised as the cause in the course of troubleshooting and during an ECU diagnosis,
a check should be run to determine how far a software update is available for the engine control unit.
A software update can be carried out, for example, via Hella-Gutmann macsRemote Services or by using a pass-through-capable diagnostic device from the mega macs series. Furthermore, registered access to the vehicle manufacturer's online portal is required. If the appropriate equipment is not available, please contact an authorised specialist workshop.
This defect may also occur in other models with the same type of engine.
Please always follow the repair instructions from the vehicle manufacturer when carrying out such work.
Reprinting, distribution, reproduction, exploitation in any form or disclosure of the contents of this document, even in part, is prohibited without our express, written approval; indication of the document source is also required. The schematic illustrations, pictures and descriptions serve only for the purposes of explanation and representation of the instructions and cannot be used as a basis for installation or assembly work. All rights reserved.
Not helpful at all
Very helpful