Caution: risk of burns. The lamps may still have residual heat from previous operation.
Never touch the glass bulbs of the lamps with bare hands.
To replace the lamps, proceed as follows:
Overview: light function
1: Stop light; 2: Direction indicator light; 3: Rear light
Figure 8
· Re-insert the rear light and secure with the plastic nuts (figure 3) by turning in a clockwise direction
· To replace the rear lights on the front passenger side, open the cover on the right (figure 10)
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 9
Figure 10
Figure 11
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful