There have been complaints of noise in the front roof lining area in the vehicles specified above.
The cause of this noise development could be the clips that were used as a mounting aid for the panorama windshield (figure 1).
The clips may come loose due to heat generation (insolation) for example.
Proceed as follows to rectify the problem:
· Remove the roof lining as described in the vehicle manufacturer's repair manual.
· Carefully loosen the clips (figure 2, position 1) using a plastic wedge (figure 2, position 2) and remove them.
Attention: do not use any sharp-edged tools!
· The fixing brackets (figure 2, position 3) can be bent downwards if required.
· Re-install the roof lining as described in the vehicle manufacturer's repair manual.
The clips are no longer used in production as of 08/29/2012.
Figure 1
Figure 2
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful