The criticism has been made that the airbag indicator lamp lights up in the above vehicles.
The following error codes may also be stored:
A possible cause could be a damaged cable strand in the airbag system (in the area of the rail system of the front seat adjustment).
Check the cable strand for damage. In doing so, check in particular for signs of abrasion.
If a cable strand is laid incorrectly (marked in figure 1), it may be damaged.
The work listed below must only be carried out by a specialist garage with the corresponding expertise.
(make sure the cable strand is correctly installed)
Figure 2
Figure 1
Figure 2
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful