Indicative of:
Injection valve 1–4, malfunction in electric circuit.
If the issue listed above occurs in combination with the indicated error codes, an engine control unit software update should first be installed.
If this does not produce any improvement, the plug connectors should be checked and, as required, replaced by an improved connector cable set with a cable cross-section of 2.5 mm².
The vehicle manufacturer has already addressed the issue. A modified cable set is installed from engine identification number Z19DTH17000444.
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful