Should the air-conditioning system and/or compressor not function properly in the above vehicles, a defect/fault in the area of the outside temperature sensor might be the cause.
The temperature sensor is situated to the left (in direction of travel) below the cowl screen (Fig. 1). The cause of the defect can either be the sensor itself or the connecting cable (Fig. 2), which has been damaged by the wiper motor linkage. The sensor can be checked for "plausibility" via the measured value blocks, i.e. it is possible to compare the sensor value with the actual value of the ambient temperature by using a diagnostics device.
Fig 1
Fig 2
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful