CAUTION Risk of burns. The lamps may still have residual heat from previous operation.
Figure 1:
Replacing the rear combination lamps.
To replace the lamps, proceed as follows:
(Figure 5 / 6) and remove
Do not touch the glass bulbs of the lamps with bare hands (use a suitable soft cloth).
-Direction indicator lamp = 12V 21W yellow
-Rear combination lamp = 12V 21/5W
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful