If a customer complains about the above problem, this could be caused by a defective licence-plate light. No error code is recorded. Fuses, cables and connectors also do not exhibit any fault. In this case the problem is caused by the way in which the lamp failure monitor operates. The left and right licence-plate lights are each associated with the corresponding rear light. If the comfort control device detects a faulty licence-plate light it switches off all the lighting functions for the corresponding rear light. Once the licence-plate lightbulb has been replaced its rear light will also regain its function. This exact type of function monitoring and switching is present only on the CC variant of the 307.
Important safety notice
The following technical information and tips for practical use have been set up by HELLA in order to offer professional support to automotive workshops in their daily work. The information available here on this website is only to be used by appropriately trained specialist staff.
The reprinting, distribution, reproduction, exploitation in any form and disclosure of the contents of this document, even in part, is prohibited without our express written approval and indication of the source. The schematic illustrations, figures and descriptions are for explanation and presentation of the document text and cannot be used as a basis for installation or design. All rights reserved.
Not helpful at all
Very helpful